Still R70-40T User Manual

5 Operation
Error messages
Message text (German) /
Error code
Display animation
Comment
ALTERNATOR
A5811
Cyclic display every
30 sec
Starter battery does not charge.
Contact your service centre.
MOT/GEN-TEMP
A5034
Cyclic display every
30 sec
Traction motor or generator overheated.
Allow to cool.
If this does not resolve the problem, contact
the service centre.
CONTROL UNIT
A3305
Cyclic display every
30 sec
The CIO does not work.
Contact your service centre.
COOLANT LEVEL
A5611
Cyclic display every
30 sec
Low coolant level, check coolant level and
top up if necessary, see ⇒ Chapter "Topping
up coolant and checking coolant concentra-
tion", P. 6-200.
If this does not resolve the problem, contact
the service centre.
SAFETY BELT message
DANGER
Driving without a seat belt is dangerous and never
permitted!
– Always fasten the seat belt before driving.
NOTE
This mechanism (special equipment) ensures
that if the seat belt is not being used or is being
used incorrectly, the forklift truck will only drive
slowly or (optionally) will not drive at all. De-
pending on the selected version, the operating
hydraulic functions (lift/tilt) are either available
as normal, slowed down or not available at
all. This function is triggered in the following
circumstances:
142 171673 [EN]

Still R70-40T Specifications

General

Brand	Still
Model	R70-40T
Category	Forklifts
Language	English