Operation 5
Error messages
Message SITZSCHALTER (SEAT
SWITCH)
NOTE
The truck is equipped with a seat switch.
If the message
SITZSCHALTER (SEAT
SWITCH)
appears on the display, the truck
will only move slowly or (optionally) not at all.
Depending on the selected version, the ope-
rating hydraulic functions (lift/tilt) are either
available as normal, slowed down or not avai-
lable at all. This function is triggered in the
following circumstances:
7311_003-044
SITZSCHALTER
The seat switch is not actuated, while the
accelerator pedal or the steering wheel is
actuated.
The key switch is switched on.
The seat is not occupied while the accelera-
tor pedal or the steering wheel is operated.
The message
SITZSCHALTER (SEAT
SWITCH)
appears in the display. The fork-
lift truck cannot move.
– Sit on the driver seat and fasten the belt.
The forklift truck can be driven again without
restriction.
7311_003-045
SITZSCHALTER
The seat switch is not actuated, while the
operating lever is actuated
The key switch is switched on.
You are not sitting on the seat, while ac-
tuating an operating lever. The message
SITZSCHALTER (SEAT SWITCH)appears
in the display. The work functions can be
executed normally, only slowly, or not at all
depending on the version.
– Sit on the driver seat and fasten the belt.
The work functions can be operated without
restriction again.
171673 [EN] 145
To Next Page
Loading...
Need help?
General
