6 Maintenance
Maintenance as required
Servicing the mast bearing
7071_003-073
1
2
Mast bearing screws: Check the tighten-
ing torque
– Lift the fork carriage and secure against
accidental lowering.
WARNING
Risk of injury!
Observe the safety regulations for working on lift
masts, see ⇒ Chapter "Working at the front of the
forklift truck", P. 6-192.
– Check tightening torque (see ⇒ Chap-
ter "Maintenance data table", P. 6-186) of
the mast bearing screws (1) with a wrench
torque.
Lubricating the mast bearing
– Lubricate the mast bearings with grease
at the lubricating nipples (2) on the left and
right (see ⇒ Chapter "Maintenance data
table", P. 6-186).
Load chain maintenance
Testing the condition and wear of lift
chains, lubricating
– Checking the condition of the load chains
and checking for wear.
The load chains must be checked for the follo-
wing external damage:
• broken fishplates
• broken bolts
• loose, twisted bolts
•surfacerust
• stiff joints
• Wear and tear, damage to the clamping
screw and end link.
214 171673 [EN]
To Next Page
Loading...
Need help?
General
