Maintenance 6
1000-hour maintenance/annual maintenance
7071_003-047
Maintain lifting system
– Check bearings for wear and clearance.
– Check chain roller bearings, support roller
bearings on lift mast and fork carriage for
clearance, condition and secure position-
ing.
– Bearings are lubricated for life, and are
maintenance-free. Replace in the event of
damage, excessive clearance or stiffness.
WARNING
Risk to stability!
No deliberate change in the tilt angle is permitted.
Readjustment after replacement or repair of
tilt cylinders only permitted by your service
centre!
171673 [EN] 231
To Next Page
Loading...
Need help?
General
