6 Maintenance
1000-hour maintenance/annual maintenance
7097_143-001
Checking the lambda control system
– Check function and setting of lambda con-
trol system (three-way catalytic converter,
special equipment).
NOTE
This requires a special tool. Contact the cus-
tomer service office.
Checking the heating system for
leaks
– Use a testing device to check the cooling
and heating system (special equipment) for
leaks.
NOTE
A special tool is necessary for the test. Con-
tact STILL service personnel.
6327_003-016
Check lift cylinders and connections
for leaks.
– Lift the fork carriage and secure against
accidental lowering.
WARNING
Risk of injury!
Observe the safety regulations for working on lift
masts, see ⇒ Chapter "Working at the front of the
forklift truck", P. 6-192.
– Check hydraulic connections and lift cylin-
ders for leaks (visual inspection).
– Tighten leaking screw joints, repair leaking
hydraulic cylinders.
230 171673 [EN]
To Next Page
Loading...
Need help?
General
