Safety
2–4
DOC-34014 Rev. C
Safety Guidelines
Thefollowinggeneralguidelines,togetherwiththeinstructionsprovided
throughoutthisuserguide,ensureusersafetywhileoperatingand
maintainingthesystem.Ifthesystemisnotoperatedasspecified,the
userʹssafetymaybecompromised.
Printer
Installation
¾ Installationandremovaloftheprintershouldonlybedonebyqualified
servicepersonnel.
¾ Connecttheprinter(andtheUPSunit)totheelectricoutletusinga
powercordthatissafety‐certified.
¾ Theelectricoutletshouldbeeasilyaccessible,neartheprinter.
¾ Neverconnectthepowerplugtoanoutletthatdoesnothaveaground
(earth)wire,andneverdisconnecttheground.Doingsomightexpose
theoperatortoseriousdangerfromelectricshock.
FI:Laiteonliitettäväsuojakoskettimillavarustettuunpistorasiaan.
NO:Apparatetmåtilkoplesjordetstikkontakt.
SE:Apparatenskallanslutastilljordatuttag.
¾ Leaveaminimumof20centimetersbetween ventilationopeningsand
wallsorotherobjects.
Printer
Operation
¾ TheprintershouldonlybeoperatedbypersonstrainedbyaStratasys
customer‐supportrepresentative.
¾ Allpersonneloperatingormaintainingtheprintershouldknowthe
locationoffirstaidandemergencyequipmentandhowtouseit.Never
blockaccesstothisequipment.
¾ Keepfingersandotherbodypartsclearoftheprintercoverwhen
closingit.
¾ Neverattempttoopentheprintercoverwhileitisworking.
¾ Neveroverridetheinterlocksafetyswitch.
¾ Iftheinterlocksafetyswitcheverfails,donotusetheprinter.
¾ Severalpartsoftheprinterremainextremelyhotevenafterithas
stoppedoperating.AvoidtouchingtheUVlampandtheprintblock.
UV Radiation
TheUVlampusedintheprinteremitsdangerousradiation.
¾ IftheUVlampremainsonwhentheprintercoverisopen,donotstare
directlyattheUVlight.ShutdowntheprinterandcallyourStratasys
serviceprovider.
Printer
Maintenance
¾ Serviceoperationsshouldbeperformedonlybyqualifiedpersonnel
whohavebeeninstructedinrelevantsafetyprecautions.
¾ Notifyco‐workersandthosewhohaveaccesstotheObjetsystem
beforebeginningnon‐routineandhazardouswork.
Report any potential dangers and safety-related accidents to your safety
officer or to other appropriate authorities.