Stratasys Objet24 - Safety Considerations; Disposal; Work Environment

Introducing the Objet24 3D Printing System
3–6 DOC-34014 Rev. C
Safety
Considerations
Beforebeingcured,resinsarehazardousmaterials.Topreventpossible
healthhazards,followtheseprecautionsregarding printingmaterials:
• Donotexposetoflames,heatorsparks.
• Preventcontactwithskinandeyes.
• Ventilateareaswheretheyarehandled.
• Keepthemseparatefromfoodanddrink.
Curedplasticparts,however,aresafe.Theycanbehandledandstored
withoutprecautions.
Disposal
Disposeofcartridgesofmodelandsupportmaterialinaccordancewithall
applicablelawsandregulations.Ifnecessary,thecartridgescanbe
disassembledforrecycling.
Work Environment
Extremeheatandhumidityconditionscanadverselyaffecttheoperationof
theObjet3Dprinter.Useventilationorair‐conditioningsystems,if
necessary,tokeeptheworkareawithinthefollowingranges:
• 18°–25°C(64°–77°F)
• 30%–70%relativehumidity
You can find more safety information about resins in “Safety Guidelines” on
page 2-4, and “First Aid for Working with Printing Materials” on page 2-6.