Stratasys Objet24 - Professional Mode Features

DOC-34014 Rev. C 5–51
Objet24 User Guide
Professional Mode Features
SomeadvancedfeaturesofObjetStudioareonlyaccessibleinProfessional
Mode.
To see the current Objet Studio setting:
¾
OpentheToolsmenu.
Figure 5-72: Tools menu, showing Professional Mode selected
IfProfessionalModeisselected,advancedfeaturesaredisplayed.
To change the Professional Mode setting:
1. FromtheToolsmenu,selectProfessional Mode.
Thefollowingmessageisdisplayed,remindingyouthatthechange
willonlytakeeffectthenexttimeyouopenObjetStudio—eventhough
thecheckmarknexttotheProfessionalModeoptionappears
immediately.
Figure 5-73: Configuration-change message
2. Closeandre‐openObjetStudiotousetheProfessionalModefeatures.