Using Objet Studio
5–54
DOC-34014 Rev. C
To perform a test of the driver configuration and enter the suggested
pixel format ID:
1. SelectChoose Format.
2. Click
Test.
ObjetStudioreturnstherecommendedpixelformatID.
Figure 5-77: Recommended pixel format ID
3. ClickOK.
4. IntheOpenGLDriverConfigurationdialogbox(figure 5‐76),select
Pixel
Format ID
andenterthisnumber.
5. Click
Apply.
6. Displaytheotherpixelformattab,andrepeatthisprocedure.
To Next Page
Loading...
