S CLASS™ cutter User’s Manual
Basic Operation 2-12
4. Press .
The 4 separate speed parameters will now appear on the screen.
NOTE: Velocity is the main speed parameter. The default value for the three other
parameters is AUTO. This means that they are linked to velocity (which is the speed when
the tool is down). These parameters can be set individually, but will then lose the link with
the velocity parameter.
5. Press , , or to select the parameter that
needs to be changed.
The chosen parameter will appear on screen.
6. Use or to change the value.
The value (inverse) will change.
7. Press to confirm the new value. Or Press to exit the menu without
changing the value.
NOTE:. Sometimes the cutter feeds the material too fast and the media has no time to
settle and fold into the basket. A fifth speed parameter is designed for such cases. The
speed of long X axis vectors is reduced automatically so that the media does not bulge.
8. Press .
The chosen parameter will appear on screen.
9. Use or to set to automatic or constant velocity.
The value (inverse) will change.
10. Press to confirm the new value. Or Press to exit the menu without
changing the value.
To Next Page
Loading...
