The FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF emission guidelines.
The SAR values for this model phone (FCC ID: 2A28USL006D) when tested for use at the
ear is 0.61 W/kg and when worn on the body is 0.97 W/kg as described in this user’s
guide. While there may be differences between SAR levels of various phones and at various
positions, they all meet the government requirement for safe exposure.
SAR information on this model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/ea/fccid/
after searching on FCC ID:
2A28USL006D.
To find information that pertains to a particular model phone, this site uses the phone FCC
ID number which is usually printed somewhere on the case of the phone. Once you have
the FCC ID number for your phone, follow the instructions on the website and it should
provide values for typical or maximum SAR for that phone.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA) website at http://www.ctia.org/
In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6
watts/kg (W/kg) averaging over one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations
in measurements.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
This device has been tested and rated for use with hearing aids, with some of the wireless
technologies that it uses. However, there may be newer wireless technologies used in the
device that has not been tested yet for use with hearing aids. It is important to try the
different features on your device thoroughly and in different locations whilst using a hearing
aid or cochlear implant to determine if there is any interfering noise.
To Next Page
Loading...