Sun Microsystems SUN BLADE 150 - FIGURE 8-7 Removing and Replacing the Motherboard; Replacing the Motherboard

To Next Page

To Previous Page

8-14 Sun Blade 150 Service Manual • June 2002

FIGURE 8-7 Removing and Replacing the Motherboard

8.5.2 Replacing the Motherboard

Replace the motherboard as follows (FIGURE 8-7).

Caution – Handle the motherboard by the back panel or the edges only.

Note – If you will re-install the same motherboard you do not need to change the

CPU speed setting jumpers or the Flash PROM jumpers.

Other manuals for Sun Microsystems SUN BLADE 150