A-8 Sun Blade 150 Service Manual • June 2002
2. In the Admintool window, select Serial Port Manager.
3. Choose Edit.
The Serial Port Manager Modify Service window is displayed.
4. Choose the Expert level of detail.
5. From the Use Template menu, choose one of the following:
■ Modem - Dial-out only
■ Modem - Dial-in only
■ Modem - Bidirectional
6. Choose Apply.
7. Set your modem auto-answer switch to one of the following:
■ Off – Dial-out only
■ On – Dial-in only
■ On – Bidirectional
A.6.2 Changing the Serial Port Speed
To change the speed of a serial port, edit the /etc/remote file as follows:
1. Become superuser and type cd /etc.
2. Type vi remote to open the remote file in a vi text editor.
3. Type tip speed device-name.
Typical speeds are 9600, 19200 to 38400 bps.
The device name is the serial port name—for example, /dev/tty[a,b] or
/dev/term/[a,b].
4. Press Esc and Shift-colon, then type wq to save your file change(s) and to exit from
the vi text editor.
% su
Password:
# cd /etc
To Next Page
Loading...
