Sun Microsystems SUN BLADE 150 - Help Command; Openboot Diagnostics Help

4-12 Sun Blade 150 Service Manual • June 2002
The OpenBoot Diagnostics menu should appear on screen. See CODE EXAMPLE 4-7.
4.7.3 OpenBoot Diagnostics Help
Various levels of help commands can assist you in determine how to perform
diagnostics.
4.7.3.1 Help Command
The help screen provides brief descriptions of each OpenBoot Diagnostics menu tool
command as well as a listing of all NVRAM Configuration Variables which relate to
OpenBoot Diagnostics.
■ To view the help menu at the ok prompt, type:
CODE EXAMPLE 4-7 OpenBoot Diagnostics Menu
______________________________________________________________________________
| o b d i a g |
|_________________________ ___________________________________________________|
| | | |
| 1 SUNW,m64B@0 | 2 SUNW,m64B@13 | 3 ebus@c |
| 4 firewire@c,2 | 5 flashprom@0,0 | 6 floppy@0,3f0 |
| 7 ide@d | 8 keyboard@3 | 9 network@0 |
| 10 network@1 | 11 network@c,1 | 12 parallel@0,378 |
| 13 pmu@3 | 14 serial@0,2e8 | 15 serial@0,3f8 |
| 16 usb@c,3 | | |
|_________________________|________________________|__________________________|
| Commands: test test-all except help what setenv exit |
|_____________________________________________________________________________|
| diag-passes=1 diag-level=max test-args= |
|_____________________________________________________________________________|
obdiag> help