EasyManua.ls Logo

Sun Microsystems SUN BLADE 150 - Tools Required; Powering Off the System

Sun Microsystems SUN BLADE 150
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-4 Sun Blade 150 Service Manual June 2002
5.3.5 Lithium Battery
Caution This system contains a lithium battery. Lithium batteries may explode if
mishandled. Do not dispose of a battery in fire. Do not disassemble a battery or
attempt to recharge it.
5.4 Tools Required
The following tools are required to service the Sun Blade 150 system.
No. 2 Phillips screwdriver (magnetized tip suggested)
Needle-nose pliers
Grounding wrist strap
Digital voltage meter (DVM) (optional)
Antistatic mat
Place ESD-sensitive components such as the motherboard, circuit cards, hard drives,
and NVRAM/TOD on an antistatic mat. The following items can be used as an
antistatic mat:
Bag used to wrap a Sun replacement part
Shipping container used to package a Sun replacement part
Inner side (metal part) of the system cover
Sun antistatic mat, part no. 250-1088 (available through your Sun sales
representative)
Disposable antistatic mat; shipped with replacement parts or optional system
features
5.5 Powering Off the System
Caution Exit from the operating system before turning off system power. Failure
to do so may result in data loss.
1. Back up system files and data.
If Solaris is running in a windowing environment:

Table of Contents

Other manuals for Sun Microsystems SUN BLADE 150

Related product manuals