Sun Microsystems SUN BLADE 150 - Except Command; Test-All Command

4-14 Sun Blade 150 Service Manual • June 2002
4.7.4.2 Test-all Command
The test-all command executes the selftest of every device in the OpenBoot
Diagnostics menu.
Note – The OpenBoot Diagnostics test-all command is different than the POST
test-all command (used at the ok prompt). In OpenBoot Diagnostics, you cannot
specify a particular device path name and test all the children of that device.
4.7.4.3 Except Command
The except command allows the user to execute all tests except those tests which
the user specifies. The user specifies the device number of the test to be excluded.
Use commas to exclude more than one test.
Testing /pci@1f,0/isa@7/dma@0,0/floppy@0,3f0 ........ passed
Hit any key to return to the main menu
CODE EXAMPLE 4-10 Except Command
obdiag> except 1,4,5,6,8,10
Hit the spacebar to interrupt testing
Testing /pci@1f,0/ebus@c ..... ...................... passed
Testing /pci@1f,0/firewire@c,2 ...................... passed
Testing /pci@1f,0/network@c,1 ....................... passed
Testing /pci@1f,0/isa@7/serial@0,3f8 ................ passed
Hit any key to return to the main menu
CODE EXAMPLE 4-9 Test Command (Continued)