Symmetricom TimeSource 3100 User Guide

Chapter 4 TL1 Reference
Commands
102 TimeSource User’s Guide 097-72020-01 Revision K – December 2005
Activate User
This command logs the user onto the system, and begins a session. The factory-set
user name is “TELECOM”, and the factory-set password is “TS3000!!”. The user
name and password are not case sensitive (either uppercase or lowercase can be
used). The command format is:
ACT-USER:[<tid>]:<uid>:<ctag>::<pid>;
Command Example:
ACT-USER::TELECOM:<ctag>::TS3000!!;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Parameter Description
<uid> Assigned user name
<pid> Assigned password

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English