Symmetricom TimeSource 3100 User Guide

097-72020-01 Revision K – December 2005 TimeSource User’s Guide 135
Chapter 4 TL1 Reference
Commands
Retrieve Condition Equipment
This command displays current alarms and events for the specified equipment.
RTRV-COND-EQPT:[<tid>]:<aid>:<ctag>;
Command Example:
RTRV-COND-EQPT::TS3100:<ctag>;
If there are no alarms:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
If there is at least one alarm:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,,,\"<conddescr>\""...
/*LINK:<link>,CMD:<command>*/
;
Refer to Chapter 5, Troubleshooting, for a list of all <conddescr> messages, and the
recommended action.
Aid x Value Item Addressed
TS3100 – System
SPAN-x x = A E1 span A input
x = E1 span B input
RO-x x = A Remote oscillator A input
x=B Remote oscillator B input
GPS – GPS receiver

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English