Symmetricom TimeSource 3100 User Guide

097-72020-01 Revision K – December 2005 TimeSource User’s Guide 127
Chapter 4 TL1 Reference
Commands
Initialize System
This command resets the specified processor.
The command format is:
INIT-SYS:[<tid>]:<aid>:<ctag>::1;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Caution: Using this command with an <aid> of TS3100 will cause a
loss of outputs for approximately 20 minutes if ALMOUT is
SQUELCH, or unstable outputs if ALMOUT is not SQUELCH.
Aid Item Addressed
TS3100 System software
GPS GPS receiver software

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English