Symmetricom TimeSource 3100 User Guide

Chapter 4 TL1 Reference
Commands
126 TimeSource User’s Guide 097-72020-01 Revision K – December 2005
Initialize Register
This command resets to zero all the performance monitoring associated with the
entered aid. The command can be used to reset either span independently or both
spans at the same time. The command format is:
INIT-REG-EQPT:[<tid>]:<aid>:<ctag>::<montype>;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Aid Value Item Addressed
SPAN-a a = A E1 span A input
a = B E1 span B input
<montype> x ALL
ALL E1 span A and span B inputs

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English