Symmetricom TimeSource 3100 User Guide

Chapter 3 Installing the TimeSource 3100
Installing TimeWizard
88 TimeSource 3100 User’s Guide 097-72020-01 Revision K – December 2005
Set the alarm parameters as needed.
15.Click Next>>. The View the Alarm Parameters window appears, as shown in
Figure 3-28.
Figure 3-28. The View the Alarm Parameters Window
This screen confirms the alarm parameter settings from the previous screen. To
change any of the settings, click <<Back and repeat step 14.
16.Click Next>> when the alarm parameter settings are correct. The Exit
Application window appears, as shown in Figure 3-29.
Severity 2 The severity of the alarm after it has been escalated.
Service Affecting 2 The service affecting status of the alarm condition after the alarm has
been escalated.
Table 3-8. Alarm Parameters (Continued)
Setting Description

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English