Symmetricom TimeSource 3100 User Guide

Chapter 3 Installing the TimeSource 3100
Installing TimeWizard
82 TimeSource 3100 User’s Guide 097-72020-01 Revision K – December 2005
The version of TimeWizard that is installed is indicated at the top right of the
screen. The progress indicator at the bottom of the screen shows which of the
seven screens you are currently viewing.
Note that the factory default TimeSource username of “telecom” and password of
“TS3000!!” appear in the Login Information area of the screen.
Figure 3-22. The TimeWizard Main Screen
4. :If the user name or password of the TimeSource have been changed, enter the
proper user name or password, otherwise, continue with the next step.
To select the high-speed download option, in which the firmware download takes
place at approximately 12 times the default speed of 9600 baud, select the Use
High Speed (115K baud) check-box.
If you do not wish to use the high-speed download option, leave the Use High
Speed (115K baud) check-box unselected.

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English