Symmetricom TimeSource 3100 User Guide

097-72020-01 Revision K – December 2005 TimeSource 3100 User’s Guide 183
Chapter 6 Specifications
Analog 2.048 MHz Inputs
Analog 2.048 MHz Inputs
Connector Type: Wire-wrap pins for 120 Ω balanced terminations
BNC for 75 Ω unbalanced terminations
(Use only BNC or only wire-wrap connector, not
both, for one input.)
Connector Label:
BNC: SPAN IN A
SPAN IN B
Wire-Wrap (2 sets) T
R
S
Connector Location: Connector panel
Impedance: 120 Ω ±5% balanced or
75 Ω ±5% unbalanced
Bit Rate: 2.048 MHz
Format: Analog

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English