Chapter 4 TL1 Reference
Commands
134 TimeSource User’s Guide 097-72020-01 Revision K – December 2005
Retrieve Condition All
This command displays all current system alarms and events. The command format
is:
RTRV-COND-ALL:[<tid>]:ALL:<ctag>;
If there are no alarms or events:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
If there is at least one alarm or event:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,,,:\"<conddescr>\""..
/*LINK:<link>,CMD:<command>*/
;
Refer to Chapter 5, Troubleshooting, for a list of all <conddescr> messages, and the
recommended action.
To Next Page
Loading...
Need help?
General
