Chapter 4 TL1 Reference
Commands
106 TimeSource User’s Guide 097-72020-01 Revision K – December 2005
Delete Equipment
This command deletes the specified equipment from the database, removes the
input from the ensembling algorithm, and stops the monitoring for that input. Alarms
are not reported for deleted equipment. The command format is:
DLT-EQPT:[<tid>]:<aid>:<ctag>:::<spec_block>;
Command Example:
DLT-EQPT::RO-A:<ctag>;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Aid Value Item Addressed
RO-a a=A Remote oscillator A input
a=B Remote oscillator B input
SPAN-a a=A E1 span A input
a=B E1 span B input
OPT-y y = 1 to 2 ESCIU port option
(990-72020-04 systems only)
To Next Page
Loading...
Need help?
General
