Symmetricom TimeSource 3100 User Guide

Chapter 4 TL1 Reference
Commands
136 TimeSource User’s Guide 097-72020-01 Revision K – December 2005
Retrieve Equipment
This command displays parameter settings for the specified equipment. The
command format is:
RTRV-EQPT:[<tid>]:<aid>:<ctag>;
Command Example:
RTRV-EQPT::TS3100:<ctag>;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>::::<spec_block>"...
/*LINK:<link>,CMD:<command>*/
;
The parameters which may be displayed in the <spec_block> are listed below.
Aid x Value Item Addressed
ALL — All aids for this command
TS3100 — System
GPS — GPS receiver
RO-x x=A Remote oscillator A input
x=B Remote oscillator B input
SPAN-x x=A Span A input
x=B Span B input
E1-a x=A E1 A output
x=B E1 B output
OPT-a x=1 to 8 Additional E1 outputs
(990-72020-02 systems only)
Mixed E1/T1 outputs
(990-72020-06 systems only)
x=1 to 2 ESCIU ports: 1 or 2
(990-72020-04 systems only)

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English