Symmetricom TimeSource 3100 User Guide

097-72020-01 Revision K – December 2005 TimeSource User’s Guide 147
Chapter 4 TL1 Reference
Commands
Retrieve Log
This command retrieves the alarm log. The command format is:
RTRV-LOG:[<tid>]::<ctag>::almlog;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD "
<logtype>"
"<aid>:<ntfcncde>,<condtype>,<srverff>,
<ocrdat>,<ocrtm>,,[,]:<conddescr>,
[:<dgntype>]"*/
/*LINK:<link>,CMD:<command>*/
;
Parameter Parameter Description
<ntfcncde> Severity of alarm: critical, major, or minor
<condtype> Single type of alarm condition being reported on this particular line,
i.e., LOS, FAIL, TBD for each alarm
<srverff> Alarm is service affecting (SA) or non-service affecting (NSA)
<ocrdat> Occurrence date in MOY-DOM format, where MOY=1 to 12 and
DOM=1 to 31
<ocrtm> Occurrence Time of Day in HOD-MOH-SOM format, where HOD=0
to 23, MOH=0 to 59, SOM=0 to 59
<conddescr> Text string of no more than 64 characters enclosed within a pair of
escape quotes (\)
<dgntype> TL1 identifier up to 16 characters in length

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English