Chapter 4 TL1 Reference
Commands
132 TimeSource User’s Guide 097-72020-01 Revision K – December 2005
ENDOFTEXT=a a = 1 to 9F Hex code at end of all responses
a = 00 No hex code at end of responses
ECHO=a a = ALW Echoes characters received so they appear on
the user's screen as typed
a = INH Local echo is disabled
COMPRI=a a = ALW0 TL1 commands and responses, no autonomous
messages sent
a = ALW1 TL1 commands and responses, sends
autonomous messages
a = ALW2 TL1 commands and responses, sends
autonomous messages whether or not logged on
a = INH Closes connection, logs off a user (if logged on),
and keeps port from use (a port cannot close
itself)
AUTOLOGOFF=a a = 1 to 255 Inactive minutes until the unit logs off the user,
keeping the connection open
a = 0 Autologoff is disabled
SWCONTROL=a a = ALW XON/XOFF flow control is enabled
a = INH XON/XOFF flow control is not enabled
HWCONTROL=a a = ALW Serial port CTS/RTS flow control is enabled
a = INH Serial port CTS/RTS flow control is not enabled
BAUD=a a = 115 Serial port baud rate is 115 kbaud
a = 57.6 Serial port baud rate is 57.6 kbaud
a = 38.4 Serial port baud rate is 38.4 kbaud
a = 19.2 Serial port baud rate is 19.2 kbaud
a = 9600 Serial port baud rate is 9600 baud
a = 4800 Serial port baud rate is 4800 baud
a = 2400 Serial port baud rate is 2400 baud
To Next Page
Loading...
Need help?
General
