Chapter C Chapter C
Maintenance Mode
102
W301-0411E
2.8.11 MDT Check, Display of Lower Section Ao Check State
Displays the input/output status of MDT. In the MDT check selection menu of Fig. 2.8.1, select "Lower Ao
Check," and press the <
> key to display the MDT check lower Ao signal state display screen shown in
Fig. 2.8.9. To go back to the MDT check selection menu, press the <
> key.
Fig. 2.8.9 Display screen of MDT check lower Ao signal state
<Description of display contents>
No.: Input/output number of lower Ao signal state display (241 to 243)
Port: Lower Ao state display signal name
Out: Current output value (Ao value: 0 to 1023)
<Operation method>
To go back to the MDT check selection menu, press the <
> key.
To Next Page
Loading...