TB30s SIP Administrator Guide v1.3 Page 93 of 259
Function keys:
The feature keys are split in 3 pages:
F1 to F10
F11 to F38 (1st extension module, will only appear if the module is detected)
F39 to F66 (2nd extension module, will only appear if the module is detected)
On each page, the feature keys are detailed in a list.
For each line the administrator is able to setup:
The line type:
Line (normal speedial)
or
Supervised Line (Supervised behavior described above)
The corresponding extension
3.2 Provisioning files (APS)
Feature keys are configurable using configuration files, either common or
MAC specific, and syntax is the same for both. These parameters, as can be
checked in TB30S_Config file syntax document and sample files, will be
included in [sys] section.
The parameters will follow this pattern:
FeatureKeyExtXX=Y/<sip:2006@10.0.0.5>
With: 01 <= XX <= 66
With: Y = [L:S]
L= Line (no supervision)
S= Supervised Line
Ex:
FeatureKeyExt01=L/<sip:2345@domain1.com>
FeatureKeyExt02=L/<sip:3455>
FeatureKeyExt03=L/<sip:number@domain2.com>
FeatureKeyExt04=L/<sip:>
FeatureKeyExt05=L/<sip:>
FeatureKeyExt06=S/<sip:346666666>
FeatureKeyExt07=S/<sip:345455555@mydomain.com>
Examples with Asterisk SIP server as notifier
--------------------------------------------------------------------------------
Sent to udp:10.0.0.5:5060 at 19/10/2005 12:26:20:770 (425 bytes):
#With this message 2200@lan subscribes to the state of 2205. The message will be forwarded to
2205 or not depending on Proxy capabilities
SUBSCRIBE sip:2205@lan.net;user=phone SIP/2.0
Via: SIP/2.0/UDP 10.0.0.1:2051;branch=z9hG4bK-wkwhbwu19wgc;rport
From: <sip:2200@lan.net>tag=gumvap0ha0
To: <sip:2205@lan.net;user=phone>
Call-ID: 3c2675eaad57-2fjnztudzq25@TB30
CSeq: 1 SUBSCRIBE
Max-Forwards: 70
Contact: <sip:2200@10.0.0.1:2051;line=xjqldyhz>
Event: dialog
To Next Page
Loading...
Need help?
General