TB30s SIP Administrator Guide v1.3 Page 220 of 259
Hide Missed Calls flag
The purpose of this feature is being able to deactivate/activate Missed Calls message display on the
phone screeen.
This will have mainly interest within the framework of call centres in which calls are sent to all Agents
and only picked up by one of them, whereas it is not desirable to have all other phones of the group
announcing a missed call.
Feature activation
APS is currently used to activate/deactivate this feature, via the parameter described in next paragraph.
Keyword definition and usage
The parameter governing this feature, included in the [ipp] section, is:
HideMissedCall
Values : 0 or 1
Meaning :
0 : Missed Calls message will be displayed
1 : Missed Calls message will not be displayed
Example :
[ipp]
HideMissedCall=1
Autoanswer device routing
The purpose of this feature is being able to select which audio devices will be activated when
Autoanswer feature is enabled.
In previous versions, default device was handsfree speaker/mic. In Call Centre environments it
makes more sense to use headset for this purpose.
Feature activation
Web GUI or APS are currently used to control this feature. Please note the Autoanswer timer
must be different from 0 for Autoanswer to be activated.
In the web gui, go to AdvancedAdvanced section
Keyword definition and usage
The parameter governing this feature, included in the [ipp] section, is:
AutoAnsMode
Values : 0 or 1
Meaning :
0 : Autoanswered call routed to handsfree
1 : Autoanswered call routed to headset
Example:
[ipp]
AutoAnsMode=1
AutoAnsTimer=2
To Next Page
Loading...
Need help?
General