Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 222 of 259
NTP address source configuration
In previous TB30 versions, NTP server address was either taken from the
DHCP server, or from stored values if DHCP server was not serving this
parameter.
This feature allows the administrator to decide which will be the source of
NTP address.
Feature activation
APS is currently used to control this setting.
Keyword definition and usage
The parameter governing this feature, included in the [ntp] section, is:
NtpMode
Values : 0, 1
Meaning :
0 : NTP address retrieved from stored value
1 : NTP address retrieved preferably from DHCP server
Example :
[ntp]
NTPFlag=1
NtpIP=192.43.244.18
NtpDaylight=1
NtpMode=0
NtpZoneNum=50
NtpSyncTime=1
Information shortcut-“Menu” long press
The purpose of this feature is to facilitate Support tasks, by granting fast
access to basic phone information: HW and FW version, MAC and IP address,
etc
This information was already provided by pressing UserInformation
Now, access to this submenu is also available by long pressing “Menu” key

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English