Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 126 of 259
Transfer On ringing
[Transf] softkey should be able to show on ringing in MMI selectively
with/without respect to the CallForward bit in parameter “OptionVisible”.
Current implementation
Since x.61, [Transf] softkey enable/disable on ringing in MMI with respect to
the call forward bit in parameter “OptionVisible” accordingly.
In other words,
CallForward bit in parameter “OptionVisible” = 1  [Transf] softkey on
ringing shows on the screen.
CallForward bit in parameter “OptionVisible” = 0  [Transf] softkey on
ringing NOT shows on the screen.
New Implementation
A new parameter in Common and MAC configuration files is added to
increase the flexibility to assign the [Transf] softkey on ringing shown in MMI
with/without respect to the call forward bit in parameter “OptionVisible”
accordingly.
TransfOnRingFlag =<0/1>, 0 is disable (by default), 1 is enable
TransfOnRingFlag = 0, [Transf] softkey is always enable without respect to
the call forward bit in parameter “OptionVisible.
TransfOnRingFlag = 1, [Transf] softkey with respect to the call forward bit in
parameter “OptionVisible” enable/disable. (Same as
the current implementation above)
[Transf] softkey enable/disable on ringing in
MMI is directly followed the activation /
deactivation of callforward bit accordingly.

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English