TB30s SIP Administrator Guide v1.3 Page 127 of 259
Table below describes the Enable/Disable of the [Transf] softkey on Ringing
with Call forward bit in “OptionVisible”.
Feature Activation
A new parameter is needed to configure this function and with some
additional definitions listed below.
Via APS:
APS in [ipp] section of both Common and Specific-MAC config files with the
new parameter:
[ipp]
…
OptionVisible=8191
TransfOnRingFlag =0 //by default, transfer on ringing is always enabled
…...
Via Telnet
To configure, open a command line console, and telnet the phone:
To Next Page
Loading...