TB30s SIP Administrator Guide v1.3 Page 238 of 259
The protocol provides support for a CPE to make available information that the ACS may use to
monitor the CPE’s status and performance statistics. The protocol defines a common set of such
parameters, and provides a standard syntax for vendors to define additional non-standard
Diagnostics
The protocol provides support for a CPE to make available information that the ACS may
use to diagnose connectivity or service issues. The protocol defines a common set of
such parameters and a general mechanism for adding vendor-specific diagnostic
capabilities.
CPE Configure Settings
Webpage
Not all configure can be set via webpate. Please refer below illustrate.
1. Entering the webpage of the phone http://x.x.x.x/admin.html
2. enter ADVANCE=>CWMP(TR-069) webpagepage
3. CWMP(TR-69): enable/diable TR069 fouction.
4. Auto Configuration Server:
5. ACS User Name/ACS Password:
6. Inform Interval:
To Next Page
Loading...