Technicolor TB30 - Feature Activation

TB30s SIP Administrator Guide v1.3 Page 99 of 259
Parameter name
Description
Values
Default
value
CLI commands
BLFType
Type of BLF that
is active
0: User-Oriented BLF is active
1: List-oriented BLF is active
2: Presence based BLF is active
0
sys set blf_type
[0(User-oriented
BLF), 1(List-
oriented BLF), 2(Presence-based
BLF)]
FeatureKeyExt01
..
FeatureKeyExt66
Configure feature
key as line key or
supervision key for
monitor extension
L: Line Key
S: Supervision Key
G: Sylantro Group Pickup
R: Sylantro last number recall
B: Sylantro BLA extension
E: Extension Tekelec
D: DTMF
V: Service
U: Service Supervision
A: Broadsoft SCA
M: multi-Registration
L/<sip:>
sys show fk 1
..
sys show fk 6
Feature Activation
Via APS
APS in [sys] section of both Common and Specific-MAC config files with
BLFType parameter.
[sys]
…
BLFType=2
…
Via Telnet
To configure, open a command line console, and telnet the phone:
Example:
BLFType is set to Presence Based BLF (sys set blf_type 2)
Then type commit and then activate to apply the change.
[administrator]# sys set blf_type 2
[OK] Set OK
[administrator]#