TB30s SIP Administrator Guide v1.3 Page 164 of 259
Call Pick-Up Service
Feature Activation
A) Through the WebGui:
The activation of this feature is accessible from the WebGui in the Advanced
Call Feature section.
B) Through APS:
For this purpose, two new parameters have been included in the [sip]
section of the Common/MAC config files, to be able to configure the feature.
[sip]
CallPkupFlg=sc
CallPkupSC=*53
C) Through Telnet:
For this purpose, two new parameters have been created:
sip set CallPkupFlg [local|sc]
sip set CallPkupSC (call pickup star code)
Behavior
Call pick-up with Soft Key
1. Press Pick-Up soft key.
2. The phone will display "Enter a number".
3. Then, user will enter the extension number to be picked up.
4. The phone will send the INVITE with TO header set to "SC + phoneNr"
Call pick-up with Function Key (User oriented BLF)
1. Press FK when blinking (BLF = early)
2. The phone will send the INVITE with TO header = SC + phoneNr
3. Is the same behavior as above, except that phone number = supervised
line (will no prompt to user).
Call Flow: