Technicolor TB30 - Release Package Firmware; Able 7 Dsp and Boot Code Used

TB30s SIP Administrator Guide v1.3 Page 259 of 259
Example of file TelConf: (Don’t touch)
Not recommended to change.
Specific file MAC:
The content is the same as common_config file, except the parameter
“config_sn=xxxxxxxxxxxx”, which need to be changed for each APS update.
Files Deck: (only MGCP)
Until version 1.61.4 (11 files):
MC.080620.abrege.thd
MC.080620.call.thd
MC.080620.config.thd
MC.080620.default.thd
MC.080620.filtrage.thd
MC.080620.log.thd
MC.080620.main.thd
MC.080620.phonebook.thd
MC.080620.renvoi.thd
MC.080620.register.thd
MC.080620.supervision.thd
Release Package Firmware
The following table show the DSP and Boot code used for different firmware.
Software Version
Firmware
DSP Code
Boot Code
V1.72
TB30S.100604.1.72.0.zz
TB30S_V2.30.1_dsp.zz
TB30S_V0.01.1_bc.zz
V1.70.4
TB30S.100204.V1.70.4.zz
TB30S_V2.30.1_dsp.zz
TB30S_V0.01.1_bc.zz
Table 7 DSP and Boot Code used
End of document