TB30s SIP Administrator Guide v1.3 Page 81 of 259
USB Login/logout (3995) v1.72
INTRODUCTION
The idea is to use USB for Login/Logout so that we can work for Open Office with FreeSeating.
User has a single USB with Name & Phone number & one configuration.
If the user plugs the USB into TB30, it will login automatically. If the user unplugs the USB
drive from TB30, it will logout automatically.
Requirement
Same as the current manual login/logout, we need to enable the manual_log configuration.
Config file: ManualLog = 1
Telnet: sys set manual_log 1
A new parameter is added for USB logon/out. This parameter is configurable in common config
file and telnet.
Config file: logINlogOUTmode = 0/1
Telnet: sys set LoginLogoutMode 0/1
(0: current login/logout behavior; 1: usb login/logout behavior)
Also in web, there is a check box to enable/disable this feature.
When the USB drive (FAT32 format only) is plug into TB30, it will check for the login/logout
config file (TB30LogINLogOUT.txt or TB30LogINLogOUT.ser. If both files exist, only
TB30LogINLogOUT.ser will use). If a config file is in the USB key, it will read the config file
and setup the phone automatically. When the USB drive is unplug, it will restore the original
setting. The config file format is:
UserID /PWD/PhoneName/PhoneNum/PinCode
e.g. RegID/RegPwd/Hong/1000/0000
If the Pin is not empty, it prompts the user for a PIN code when you insert the USB key. If the
PIN code is correct apply the dynamic profile, else stay with default profile (in reference of
login/logout spec).
Encryption/Decryption tools:
Name: Window_Aes_cbc_128.exe (including in release package/ Decryption tool folder)
Press F1 for get HELP window
Decryption key
Config file: Log_Decryption_Key = Th0mson2$8s8@9z! (default)
Telnet: sys set LoginDecKey Th0mson2$8s8@9z!
To Next Page
Loading...
Need help?
General