TB30s SIP Administrator Guide v1.3 Page 103 of 259
DSCP of DHCP
In this release, you can change DSCP of DHCP separately.
Feature Activation
Via Web GUI
1. Login to TB30 Web GUI
2. Go to Advanced Page
3. Choose QoS
4. In Diffserv, choose Voice
5. In DS Code Point for DHCP, change the vale you want.
6. Press Apply and restart the phone.
Via APS
APS in [qos] section of both Common and Specific-MAC config files with the
new parameter – DSCP3.
DSCP3 = 0 ~ 63
[net]
…
DSCPflag=1
…
[qos]
…
DSCP3=0
…
Via Telnet
To configure, open a command line console, and telnet the phone:
Example:
Then type commit and then activate to apply the change.
To Next Page
Loading...
Need help?
General