TB30s SIP Administrator Guide v1.3 Page 237 of 259
Part 13 TR069 & TR111
Purpose
VOIP phone TB30 support TR069, TR111 and its data structure TR104, TR106. This document has brief
description of this new generation network management and focus on the FW download RPC.
Introduction
TR-069 is a standard for remote management of CPE (Customer Premises Equipment) defined by the DSL
Broadband Forum. TR-069 uses common transport mechanisms (HTTP and HTTPS) for communication
with CPE. The HTTP(S) messages contain XML-RPC methods defined in the standard for configuration
and management of the device.
Typically on router on customer premises provides Internet connectivity to many phones as indicated in
Figure 1. The ACS can now manage the router and all phones located behind it remotely.
The CPE WAN Management Protocol is intended to support a variety of functionalities to manage a
collection of CPEs lie in LAN through WAN. It provides the following main capability :
Auto-Configuration and Dynamic Service Provisioning
The protocol allows an ACS to provision a CPE or collection of CPE based on a variety of criteria.
The provisioning mechanism includes specific provisioning parameters and a general mechanism for
adding vendor-specific provisioning capabilities as needed.
Software/Firmware Image Management
The CPE WAN Management Protocol provides tools to manage downloading of CPE
software/firmware image files. The protocol provides mechanisms for version
identification, file download initiation (ACS initiated downloads and optional CPE
initiated downloads), and notification of the ACS of the success or failure of a file
download.
Status and Performance Monitoring
To Next Page
Loading...