Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 239 of 259
Parameter in config file & CLI
Please use >cwmp in command line. It will list the command which can be used to do some
setting. Any syntax please refer to the file TB30S_Config File CWMP flow
File System
Parameter
Valid values
Default
CLI
Description
CWMPFlag
0 disable
1 enable
0
cwmp set
flag 1/0
Enable/disable cwmp TR069
CWMPACS
URL
empty
cwmp set
acs acsurl
URL of the TR-069 ACS. This is
the URL the phone will send TR-
069 messages to. Please contact
your ACS vendor to find out
about this URL.
CWMPACSUser
STRING
empty
cwmp set
user
username
Username for HTTP
authentication against the ACS
CWMPACSPassword
STRING
empty
cwmp set
pwd
password
Password for HTTP
authentication against the ACS
CWMPConnReqUser
STRING
empty
cwmp set
requser
username
ACS's Connection-Request User
Name
CWMPConnReqPassword
STRING
empty
cwmp set
reqpwd
passward
ACS's Connection-Request
Password
CWMPPeriodicFlag
0 disable
1 enable
1
cwmp set
pflag 1/0
cwmp set pflag <on(1)/off(0)>
CWMPPeriodicInterval
Periodic
Interval
180
cwmp set
interval
CPE will send INFORM according
to this period time
TR111STUNEnable
0 disable
1 enable
0
cwmp set
stunflag 0/1
Enable or disable the stun
TR111STUNSrvAddr
IP
empty
cwmp set
stunserver
IP
Set CPE stun server address
TR111STUNSrvPort
Port
3478
cwmp set
stunport
xxxx
Set CPE stun port
TR111STUNUName
STRING
empty
cwmp set
stunuser
username
STUN server user name
TR111STUNpwd
STRING
empty
cwmp set
stunpwd
password
STUN server pwd
Note: Many other parameter is define in file:TB30_Config File Syntax_Vxxxx_modified.doc
For large-scale installations in case many phones need to be connected to an ACS it is
strongly recommended to use the TB30 Autoprovision method. Setting the vaue in [cwmp]
part in common config file. And the detail APS flow please refer to TB30 AutoProvisioning-
Vxxxx.pdf

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English