Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 28 of 259
Switch Between Line/Call
The IP phone supports up to 10 multi-lines that is configurable by administrator. Each line can be
switched by pressing line keys (i.e. keys F1 – F10). Besides the current active line, all others are held by
IP phone and can be resumed by pressing associated line key or pressing proper soft key. And the first
call is always assigned to line 1.
Press active line key will terminate the call.
<For example >
When you are communicating with one party and wish to make a brief to another party.
 Press a free line key (then you will hear dial tone, and the original call is held)
 Key in number you want to call
Or
 Press NewCal (then you will hear dial tone, and the original call is held)
 Key in number you want to call
Answer an incoming call when another call is active.
 The phone will assign a free line dedicated to the incoming call, and the associated LED
will blink fast.
 Press the line key, and the original line is held by phone automatically
Or
 Scrolling the ringing line
 Press Answer to answer the call
Switch between lines.
 Press the line key you desire, and the original line is held by phone automatically
Or
 Scrolling to the line
 Press UnHold to resume the call
Pick up
A station user may dial a special code to answer any incoming calls
 Use menu (table, arborescence)
 Use HD, SP, HD, Adjust volume
To pick up call on another phone.
 Press PickUp key in standby mode
 Key in the phone number. You are connected with the caller.
 Press OK

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English