Technicolor TB30 - Page 116

TB30s SIP Administrator Guide v1.3 Page 109 of 259
TransportFlgBK4=2 // TLS type for backup profile 4
…
APS in [sys] section of both Common and Specific-MAC config files with the
new parameters:
For SRTP, the parameter is SRTPFlag= , where 0 disable (default),
1 - enable.
[sys]
…
SRTPFlag=1 // Disable (default)
…
Via Telnet
To configure, open a command line console, and telnet the phone:
Example:
1. SIPS URL type is set for profile 1
2. TEL URL type is set for backup profile 1
3. Set TLS to be SIP transport for profile 1
4. Set SRTP ON
[administrator]# sip set url_typemp 1 2
[OK] Set OK
[administrator]# sip show url_typemp 1
SIP : URL Type 1 = SIPS
[administrator]# sip set url_typebk 1 1
[OK] Set OK
[administrator]# sip show url_typebk 1
SIP : URL Type 1 = TEL
[administrator]# sip set transportmp 1 2
[OK] Set OK
[administrator]# sip show transportmp 1
SIP : TransportMP20 = TLS
[administrator]# sip set srtp 1
[OK] Set OK
[administrator]# sip show srtp
SRTP : ON