Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 124 of 259
Each time user enters in the call log menu by pressing the “CalLog” softkey,
the phone will download the relevant file from the server using the HTTP GET
method.
A new parameter “RCallLogFlg” is introduced to decide enabling either local
call-log or remote call-log.
The default value is 0, which means the local call log is enabled,
While, the value is 1, which means the remote call log is enabled.
In addition, the URL for this remote call-log file is configurable using a new
parameter: “RCallLogURL”.
The data are stored on the phone until the user quits the call log menu by
pressing [Back] soft key or “C” key or the phone returns to the idle screen
after a timeout.
Feature Activation
Via WebGui
Visit ADVANCED  advanced, click the support Remote call logs check box.
Enter the remote call log URL in the field.
Via APS
An RCallLogFlg parameter is created and added in the [sys] section of both
Common and Specific-MAC config files.
RCallLogFlg = 0, (by default), the local call logs will be in use.

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English