Technicolor TB30 - Page 142

TB30s SIP Administrator Guide v1.3 Page 135 of 259
FK5 to FK6: Use to monitor the status of CFW and DND of the
supervised phone (Supervised phones: 2005)
FK7: CFU (Self Phone) LED indicates ON/Off, Press Key for
activation or Deactivation depends on the current status of
the service.
FK8: DND (Self Phone) LED indicates ON/Off, Press Key for
Activation or Deactivation depends on the current status of
the Service.
FK9: Use to supervise other phone with SF service. LED
indicates ON/Off, Press Key for Activation or Deactivation
depends on the current status of the Service.
FK10: Use to supervise other phone with HG service. LED
indicates ON/Off, Press Key for Activation or Deactivation
depends on the current status of the Service.
Via WebGui:
Firstly, it is required to reduce the number of Multiline to reserve the number
of supervised lines in Function Key, in Advanced  Advanced. Change the
Multiline to be 2 and apply.
Then, you should go to Function key table through Advanced  Call feature
 Function Key table.
Select the item in the roll down “Type” menu: Supervised Line and enter
the supervised phone numbers in the corresponding field of the function
keys.
In this case, the function keys 3 to 4 will monitor the dialog, registration
with DND service for the corresponding supervised phones. Therefore, the
boxes for dialog and regDND for each supervised phones are checked.
Likewise, the function key 5 is to monitor the status of CFW and DND of the
supervised phones, the ua-porfile option must be checked. Click the
Change TB30(S) to apply.
Then, click the Detail button to go into the sub-menu of the ua-profile