TB30s SIP Administrator Guide v1.3 Page 141 of 259
1. In Ringing (During call incoming) state
TB30 display the Caller and the Redirecting name alternatively on the
screen, and the redirecting name will be displayed in reverse video. The time
interval for the swap will be in 1 second.
If the diversion header has Redirecting party Name, phone should display
“Bob the Manager”, but if it doesn‟t have Redirecting party Name, phone
should display Number “81000541”.
2. In Talking state:
TB30 display the Caller name with number.
3. In Call log:
The call log list shows the detail of caller information.
Remark:
If the phone number of “Bob the manager” is saved in phone book, the
display should show the name in the phone book.
Only top header is showed.
Feature Activation
Via APS:
A new parameter will be introduced to activate/deactivate the feature of
redirecting identity and name presentation in [sip] section of both Common
and Specific-MAC config files.
DiversionHeaderFlag= <0|1>,
Where, 0 is disable (default setting),
1 is enable
[sip]
…..
DiversionHeaderFlag =0 // by default, disable
DiversionHeaderFlag =1 // Diversion header is supported
…...
Via Telnet
To configure, open a command line console, and telnet the phone.
To Next Page
Loading...
Need help?
General