TB30s SIP Administrator Guide v1.3 Page 177 of 259
8. send REFER to C to move to conference ID (as described in section 5.6 of the rfc-4579)
Feature Activation
A) Through the WebGui:
The activation of this feature is accessible from the WebGui in the Advanced
Call Feature section.
B) Through Telnet:
For this purpose, two new parameters have been created, described as
follow:
sip set conference_mode [ 0(Local Conference)/
1(Network Conference)/
2(Centralized Conference (RFC4579))]
sip set conf_uri (Max 191 chars)
To configure, open a command line console, and telnet the phone:
C) Through APS:
For this purpose, two new parameters have been included in the [sip]
section of the Common/MAC config files, to be able to configure the
conference mode and the conference factory URI.
[sip]
...
ConferenceMode=2
ConferenceFactoryURI=conf
...
The parameter “ConferenceFactoryURI” could be either a SIP URI or a phone
number. The default value is “conf”.
Examples:
ConferenceFactoryURI=5000
ConferenceFactoryURI=conference@10.0.0.1
ConferenceFactoryURI=conf
To Next Page
Loading...