TB30s SIP Administrator Guide v1.3 Page 182 of 259
Examples:
KeppAliveDest=server@domain.com
KeppAliveDest=122.22.22.22
KeppAliveDest=domain.com
2. The time interval between 2 SIP OPTIONS requests.
The value is in seconds and between 0 and 600.
With 0 meaning disable sending Keep-Alive packets (default value).
Examples:
KeepAliveTimer=0
KeepAliveTimer=120
Feature Activation
A) Through the WebGui:
This feature can not be configured through the Web.
B) Through APS:
For this purpose, two new parameters have been included in the [sip]
section of the Common/MAC config files, to be able to configure the nat.
[sip]
...
KeppAliveDest=0.0.0.0
KeepAliveTimer=0
...
C) Through Telnet:
For this purpose, two new parameters have been created, described as
follow:
sip set NatkeepaliveDest (Max 127 chars)
sip set NatkeppaliveTimer (range 0 - 600)
To configure, open a command line console, and telnet the phone:
To Next Page
Loading...