TB30s SIP Administrator Guide v1.3 Page 184 of 259
Feature Activation
A) Through the WebGui:
This feature can not be configured through the Web.
B) Through Telnet:
For this purpose, a new parameter has been created, described as follow:
sip set auth_notify_sync_srv (Max 127 chars)
To configure, open a command line console, and telnet the phone:
C) Through APS:
For this purpose, a new parameter has been included in the [sip] section of
the Common/MAC config files, to be able to configure the server.
[sip]
...
AuthNotifyCheckSync=10.0.0.1
...